P0C23 — Auxiliary transmission pump control module circuit open
| Meaning | The control unit detected a break in the circuit that connects the control module of the electric auxiliary transmission fluid pump. In practice the electrical link behaves as if it were unplugged, so the pump does not receive or return the correct signals. The transmission may lose the pressure this pump is supposed to provide. |
| Family | Powertrain (P) |
Typical symptoms
Slow or harsh gear engagement after a stop
Stop&Start not working
Vehicle running in a limited mode with reduced performance
Transmission fault message on the dashboard
Common causes
Corroded or poorly seated connector
Missing fuse or power supply to the module
Faulty pump control module
Wiring damaged by heat, moisture or rubbing
What to do
How to read code P0C23
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C23 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (23) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C23 mean?
Auxiliary transmission pump control module circuit open. The control unit detected a break in the circuit that connects the control module of the electric auxiliary transmission fluid pump. In practice the electrical link behaves as if it were unplugged, so the pump does not receive or return the correct signals. The transmission may lose the pressure this pump is supposed to provide.
Can I keep driving with code P0C23 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C23
Broken wire or terminal pushed out of the connector Corroded or poorly seated connector Missing fuse or power supply to the module Faulty pump control module Wiring damaged by heat, moisture or rubbing
How do you fix code P0C23?
First check the fuses, connector and wiring of the pump module, as these are the easiest causes to verify. Do not ignore the fault, because the transmission works best with correct pressure. If shifting is irregular, limit use of the car.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C22 — Auxiliary transmission fluid pump motor phase U-V-...
- Next code: P0C24 — Auxiliary transmission pump control module circuit...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open