Skip to content
Fault code dictionary (DTC)

P0C24 — Auxiliary transmission pump control module circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measures a voltage that is too low in the circuit of the control module of the electric auxiliary transmission fluid pump. It can come from a short to ground or from an abnormal resistance in the connection. The module may therefore not drive the pump properly.
FamilyPowertrain (P)

Typical symptoms

Check engine or transmission warning light on
Hesitant or harsh shifting after a restart
Stop&Start disabled
Reduced performance in fail-safe mode
Possible unusual noise from the pump

Common causes

Wire shorted to ground through worn insulation
Connector with water, corrosion or dirty terminals
Faulty pump control module
Weak 12 V battery or unstable voltage
Pump drawing abnormal current

What to do

First have the 12 V battery voltage, ground connection, connector and pump wiring checked. A short to ground can damage the electronics, so it is not wise to postpone. If the transmission behaves oddly, use the car as little as possible.

How to read code P0C24

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C24 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (24) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C24 mean?

Auxiliary transmission pump control module circuit low. The control unit measures a voltage that is too low in the circuit of the control module of the electric auxiliary transmission fluid pump. It can come from a short to ground or from an abnormal resistance in the connection. The module may therefore not drive the pump properly.

Can I keep driving with code P0C24 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C24

Wire shorted to ground through worn insulation Connector with water, corrosion or dirty terminals Faulty pump control module Weak 12 V battery or unstable voltage Pump drawing abnormal current

How do you fix code P0C24?

First have the 12 V battery voltage, ground connection, connector and pump wiring checked. A short to ground can damage the electronics, so it is not wise to postpone. If the transmission behaves oddly, use the car as little as possible.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes