P0C27 — Auxiliary transmission fluid pump A motor current low
| Meaning | The current drawn by the motor of the auxiliary transmission fluid pump is lower than expected. The pump may be turning too slowly or not at all, or the circuit may have a weak contact. As a result, transmission fluid pressure may be insufficient. |
| Family | Powertrain (P) |
Typical symptoms
Gears engaging late after a restart
Stop&Start not working
Pump silent when it should be running
Transmission fail-safe mode
Common causes
Control module delivering too little power
Pump motor with worn brushes or failing windings
Supply voltage too low
Insufficient transmission fluid level
What to do
How to read code P0C27
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C27 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (27) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C27 mean?
Auxiliary transmission fluid pump A motor current low. The current drawn by the motor of the auxiliary transmission fluid pump is lower than expected. The pump may be turning too slowly or not at all, or the circuit may have a weak contact. As a result, transmission fluid pressure may be insufficient.
Can I keep driving with code P0C27 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C27
Weak or broken contact in the connector or wire Control module delivering too little power Pump motor with worn brushes or failing windings Supply voltage too low Insufficient transmission fluid level
How do you fix code P0C27?
First check the connector, wiring and supply voltage of the pump, then the fluid level. A pump that does not turn can leave the transmission poorly lubricated, so do not wait too long. Limit use of the car if shifting is irregular.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C26 — Auxiliary transmission fluid pump A motor current...
- Next code: P0C28 — Auxiliary transmission fluid pump A motor current...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open