P0C29 — Auxiliary transmission fluid pump A driver circuit performance
| Meaning | The control unit found that the circuit driving the auxiliary transmission fluid pump is not responding as expected: the pump gets the command, but the result does not match what was requested. The circuit is not necessarily broken, but it works incorrectly or unstably. The code alone does not say which part needs replacing. |
| Family | Powertrain (P) |
Typical symptoms
Jerky or delayed gear engagement
Stop&Start working intermittently
Pump noise or speed variations
Occasional fail-safe mode
Common causes
Control module driving the pump poorly
Pump with internal wear
Wiring with abnormal resistance
Transmission fluid in poor condition
What to do
How to read code P0C29
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C29 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (29) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C29 mean?
Auxiliary transmission fluid pump A driver circuit performance. The control unit found that the circuit driving the auxiliary transmission fluid pump is not responding as expected: the pump gets the command, but the result does not match what was requested. The circuit is not necessarily broken, but it works incorrectly or unstably. The code alone does not say which part needs replacing.
Can I keep driving with code P0C29 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C29
Connector with corroded or loose contacts Control module driving the pump poorly Pump with internal wear Wiring with abnormal resistance Transmission fluid in poor condition
How do you fix code P0C29?
Have the connectors and wiring checked, then the fluid condition and pump operation. The problem may be intermittent: tell the technician when it appears. Do not wait too long, because in some phases the transmission depends on this pump.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C28 — Auxiliary transmission fluid pump A motor current...
- Next code: P0C2A — Auxiliary transmission fluid pump A motor stalled
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open