P0C37 — Battery temperature sensor F: unstable signal
| Meaning | The hybrid or EV battery control module is getting a value from temperature sensor 'F' that jumps around or drops out at times. The sensor or its wiring works only part of the time, so the fault can come and go. Which position the letter F refers to depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Power that drops unevenly
Battery fan starting and stopping for no clear reason
Charging that stops occasionally
Warning messages that appear and then disappear
Common causes
Partly broken wire that only touches when the car vibrates
Temperature sensor working intermittently
Moisture in the connector or harness
Internal battery control module fault, rare
What to do
How to read code P0C37
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C37 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (37) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C37 mean?
Battery temperature sensor F: unstable signal. The hybrid or EV battery control module is getting a value from temperature sensor 'F' that jumps around or drops out at times. The sensor or its wiring works only part of the time, so the fault can come and go. Which position the letter F refers to depends on the manufacturer.
Can I keep driving with code P0C37 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C37
Connector with weak or corroded contact Partly broken wire that only touches when the car vibrates Temperature sensor working intermittently Moisture in the connector or harness Internal battery control module fault, rare
How do you fix code P0C37?
An intermittent fault is hard to find on a cold car, so tell the shop when it shows up: hot car, over bumps or after charging. Have a technician qualified for high voltage look at it, and don't ignore the light just because it goes out.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C36 — Battery temperature sensor F: signal too high
- Next code: P0C38 — DC/DC converter: temperature sensor A circuit faul...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open