P0C49 — Battery coolant pump A: control circuit high
| Meaning | The control module detected a higher than expected voltage on the control circuit of battery coolant pump 'A'. This usually points to a wire touching a voltage source, or a fault in the control circuit. The code alone doesn't say the pump must be replaced; the letter A is defined by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Pump running constantly or erratically
Battery temperature not well regulated
Limited power
Uneven charging
Common causes
Damaged or contaminated connector
Fault in the pump control circuit
Pump with an internal defect
Control module fault, rare
What to do
How to read code P0C49
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C49 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (49) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C49 mean?
Battery coolant pump A: control circuit high. The control module detected a higher than expected voltage on the control circuit of battery coolant pump 'A'. This usually points to a wire touching a voltage source, or a fault in the control circuit. The code alone doesn't say the pump must be replaced; the letter A is defined by the manufacturer.
Can I keep driving with code P0C49 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C49
Control wire touching a voltage source Damaged or contaminated connector Fault in the pump control circuit Pump with an internal defect Control module fault, rare
How do you fix code P0C49?
Have a technician qualified for high voltage check the pump wiring and connector and the control data with the scan tool. Don't let too much time pass: a poorly controlled pump can work badly and leave the battery outside its proper temperature range.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C48 — Battery coolant pump A: control circuit low
- Next code: P0C4A — Battery coolant pump A: performance not as command...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open