P0C4A — Battery coolant pump A: performance not as commanded
| Meaning | The control unit commanded pump A, which circulates coolant through the high-voltage battery, and found that it does not respond as requested, for example it runs too slowly or not at all. The wiring may be fine: the problem concerns how the pump performs. Without proper cooling the battery can overheat, so the system may limit power. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limited acceleration
Slower charging than usual
Battery fans louder or running constantly
Battery high-temperature message
Pump not audible or making an unusual hum
Common causes
Low coolant level or air in the cooling circuit
Blocked circuit or pinched hoses restricting flow
Poor contact in the pump connector or wiring
Faulty battery management or cooling control unit
What to do
How to read code P0C4A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C4A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (4A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C4A mean?
Battery coolant pump A: performance not as commanded. The control unit commanded pump A, which circulates coolant through the high-voltage battery, and found that it does not respond as requested, for example it runs too slowly or not at all. The wiring may be fine: the problem concerns how the pump performs. Without proper cooling the battery can overheat, so the system may limit power.
Can I keep driving with code P0C4A active?
With caution: limp mode possible, have it checked soon
Common causes — P0C4A
Worn pump or a seized impeller Low coolant level or air in the cooling circuit Blocked circuit or pinched hoses restricting flow Poor contact in the pump connector or wiring Faulty battery management or cooling control unit
How do you fix code P0C4A?
First check the level in the battery coolant reservoir and listen for the pump starting when the system commands it. Avoid fast charging and heavy loads until it is fixed. Have the car checked soon, because a poorly cooled battery wears out faster.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C49 — Battery coolant pump A: control circuit high
- Next code: P0C4B — Battery coolant pump A: supply voltage circuit ope...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open