P0C4B — Battery coolant pump A: supply voltage circuit open
| Meaning | The control unit does not detect supply voltage at pump A, which circulates coolant for the high-voltage battery: the circuit appears open or broken. The pump therefore gets no power and cannot move coolant. The system may reduce power to protect the battery. |
| Family | Powertrain (P) |
Typical symptoms
Limited power
Pump completely silent
Battery high-temperature message
Slower or interrupted charging
Common causes
Pump connector unplugged, corroded or with loose terminals
Broken or damaged wire in the harness
Pump with an open internal winding
Faulty control unit driving the pump
What to do
How to read code P0C4B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C4B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (4B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C4B mean?
Battery coolant pump A: supply voltage circuit open. The control unit does not detect supply voltage at pump A, which circulates coolant for the high-voltage battery: the circuit appears open or broken. The pump therefore gets no power and cannot move coolant. The system may reduce power to protect the battery.
Can I keep driving with code P0C4B active?
With caution: limp mode possible, have it checked soon
Common causes — P0C4B
Blown or faulty pump fuse or relay Pump connector unplugged, corroded or with loose terminals Broken or damaged wire in the harness Pump with an open internal winding Faulty control unit driving the pump
How do you fix code P0C4B?
Start by checking the fuse, relay and connector of the pump, which are the easiest causes to verify. Avoid long or heavy use until the pump works, because the battery is not being cooled. Have the circuit checked as soon as possible.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C4A — Battery coolant pump A: performance not as command...
- Next code: P0C4C — Battery coolant pump A: supply voltage too low
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open