P0C77 — High-voltage system precharge time too short
| Meaning | Before connecting the battery to the power circuits, the system slowly charges the capacitors to avoid a current surge (precharge). The control unit measured that this phase lasted less than expected. It can point to a wrong voltage reading or a component behaving abnormally. |
| Family | Powertrain (P) |
Typical symptoms
Car will not go into ready mode
Uncertain starting
Limp mode
Message to check the hybrid system
Common causes
Faulty precharge relay or contactor
Incorrect precharge resistor
Inverter capacitor with abnormal values
Fault in the battery control unit
What to do
How to read code P0C77
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C77 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (77) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C77 mean?
High-voltage system precharge time too short. Before connecting the battery to the power circuits, the system slowly charges the capacitors to avoid a current surge (precharge). The control unit measured that this phase lasted less than expected. It can point to a wrong voltage reading or a component behaving abnormally.
Can I keep driving with code P0C77 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C77
Power circuit voltage sensor reading incorrectly Faulty precharge relay or contactor Incorrect precharge resistor Inverter capacitor with abnormal values Fault in the battery control unit
How do you fix code P0C77?
If the car starts, have it checked soon but without panic; if it will not go into ready mode, do not keep trying repeatedly. Diagnosis requires reading the high-voltage values and must be done by qualified personnel.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C76 — High-voltage system discharge time too long
- Next code: P0C78 — High-voltage system precharge time too long
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open