Skip to content
Fault code dictionary (DTC)

P0CC2 — Drive motor coolant pump A: control circuit range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the control circuit of the drive motor coolant pump (labelled A) is operating outside its expected range or is not responding as commanded. This does not necessarily mean the pump itself has failed: the fault can be in the wiring, the connector or the control side. If cooling of the electric motor is not assured, the system may limit power to protect it from overheating.
FamilyPowertrain (P)

Typical symptoms

Powertrain or hybrid/EV system warning light on
Reduced power or limp mode
High electric motor temperature message
Coolant pump not audible at start-up
Cooling fans running more than usual

Common causes

Corroded or loose pump connector
Damaged pump control wiring or abnormal resistance
Coolant pump with internal friction or wear
Low coolant level or air in the circuit
Faulty pump control module

What to do

First check the coolant level in the electric motor cooling circuit and the condition of the pump connector. If a temperature warning appears or power is limited, avoid pushing the car and have it checked soon. Do not clear the code without finding the cause.

How to read code P0CC2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CC2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (C2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CC2 mean?

Drive motor coolant pump A: control circuit range/performance. The control unit detected that the control circuit of the drive motor coolant pump (labelled A) is operating outside its expected range or is not responding as commanded. This does not necessarily mean the pump itself has failed: the fault can be in the wiring, the connector or the control side. If cooling of the electric motor is not assured, the system may limit power to protect it from overheating.

Can I keep driving with code P0CC2 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CC2

Corroded or loose pump connector Damaged pump control wiring or abnormal resistance Coolant pump with internal friction or wear Low coolant level or air in the circuit Faulty pump control module

How do you fix code P0CC2?

First check the coolant level in the electric motor cooling circuit and the condition of the pump connector. If a temperature warning appears or power is limited, avoid pushing the car and have it checked soon. Do not clear the code without finding the cause.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes