Skip to content
Fault code dictionary (DTC)

P0CC4 — Drive motor coolant pump A: control circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a voltage that is too high on the control circuit of the drive motor coolant pump A. It can be caused by a short to supply voltage, a broken wire, or a problem in how the pump is driven. The risk is that the pump is not commanded correctly and cooling is not guaranteed.
FamilyPowertrain (P)

Typical symptoms

Powertrain or hybrid/EV system warning light on
Reduced power or limp mode
High electric motor temperature warning
Pump not running or running erratically
Cooling fans always on

Common causes

Control wire shorted to supply voltage
Open wire or connector with a missing contact
Faulty pump that does not load the circuit as expected
Control module with a failed output
Moisture or corrosion damage in the wiring

What to do

Check the condition of the pump connector and wiring and verify the coolant level. If temperature warnings appear, avoid demanding driving and have the system checked soon. Do not clear the code without fixing the cause.

How to read code P0CC4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CC4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (C4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CC4 mean?

Drive motor coolant pump A: control circuit high. The control unit detected a voltage that is too high on the control circuit of the drive motor coolant pump A. It can be caused by a short to supply voltage, a broken wire, or a problem in how the pump is driven. The risk is that the pump is not commanded correctly and cooling is not guaranteed.

Can I keep driving with code P0CC4 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CC4

Control wire shorted to supply voltage Open wire or connector with a missing contact Faulty pump that does not load the circuit as expected Control module with a failed output Moisture or corrosion damage in the wiring

How do you fix code P0CC4?

Check the condition of the pump connector and wiring and verify the coolant level. If temperature warnings appear, avoid demanding driving and have the system checked soon. Do not clear the code without fixing the cause.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes