P0CCB — Charge port door: open request switch circuit intermittent/erratic
| Meaning | The control unit saw the charge port door open switch signal change irregularly and intermittently. It is usually a contact that is lost through vibration, moisture or wear. The fault can come and go, so it may not show up at the time of inspection. |
| Family | Powertrain (P) |
Typical symptoms
Unintended opening or command not recognised
Warning light or message that comes and goes
Button works inconsistently
More frequent problems in rain or after washing
Common causes
Worn switch or internal dirt
Chafed wiring or damaged insulation
Moisture in the switch assembly
Door control unit with an intermittent problem
What to do
How to read code P0CCB
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0CCB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (CB) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0CCB mean?
Charge port door: open request switch circuit intermittent/erratic. The control unit saw the charge port door open switch signal change irregularly and intermittently. It is usually a contact that is lost through vibration, moisture or wear. The fault can come and go, so it may not show up at the time of inspection.
Can I keep driving with code P0CCB active?
With caution: limp mode possible, have it checked soon
Common causes — P0CCB
Connector with an intermittent contact Worn switch or internal dirt Chafed wiring or damaged insulation Moisture in the switch assembly Door control unit with an intermittent problem
How do you fix code P0CCB?
Gently move the connector and wiring with the system active to see whether the behaviour changes, and look for traces of water or corrosion. It is not urgent for driving, but an intermittent fault tends to get worse, so it is worth having it checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0CCA — Charge port door: open request switch circuit high
- Next code: P0CCC — Charge port door: position sensor circuit fault
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open