Skip to content
Fault code dictionary (DTC)

P00DA — Ambient air temperature sensor B range/performance

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is getting a value from ambient air temperature sensor B that stays within the normal electrical range but is not believable, for example it does not change or it differs too much from other sensors. The circuit is not open, but the data is wrong or unreliable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Outside temperature on the dashboard stuck or unrealistic
Automatic climate control behaving oddly
No other obvious driving problem

Common causes

Aged or out-of-range sensor
Dirty or damaged sensor
Connector with poor contact or moisture
Sensor mounted where heat affects it, for example after a repair
Wiring with abnormal resistance

What to do

Compare the displayed temperature with the real one and check the connector and position of the sensor. It is not an urgent fault, but a wrong reading can affect some adjustments.

How to read code P00DA

This is an informational entry: it normally does not limit how the vehicle works.

The code P00DA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00DA mean?

Ambient air temperature sensor B range/performance. The control unit is getting a value from ambient air temperature sensor B that stays within the normal electrical range but is not believable, for example it does not change or it differs too much from other sensors. The circuit is not open, but the data is wrong or unreliable.

Can I keep driving with code P00DA active?

With caution: limp mode possible, have it checked soon

Common causes — P00DA

Aged or out-of-range sensor Dirty or damaged sensor Connector with poor contact or moisture Sensor mounted where heat affects it, for example after a repair Wiring with abnormal resistance

How do you fix code P00DA?

Compare the displayed temperature with the real one and check the connector and position of the sensor. It is not an urgent fault, but a wrong reading can affect some adjustments.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes