Skip to content
Fault code dictionary (DTC)

P00DB — Ambient air temperature sensor B circuit low

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects a voltage that is too low on the circuit of ambient air temperature sensor B. To the control unit this looks like a very high outside temperature, or a short to ground. The reading is therefore unusable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Very high or unrealistic outside temperature on the dashboard
Automatic climate control regulating poorly
No other obvious driving problem

Common causes

Sensor wiring shorted to ground
Sensor failed internally
Wet or damaged connector
Pinched wire or damaged insulation
Problem in the control unit or module reading the sensor (rare)

What to do

Inspect the sensor wiring and connector for damaged wires or moisture. It is normally not urgent for driving, but it is worth having checked.

How to read code P00DB

This is an informational entry: it normally does not limit how the vehicle works.

The code P00DB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DB) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00DB mean?

Ambient air temperature sensor B circuit low. The control unit detects a voltage that is too low on the circuit of ambient air temperature sensor B. To the control unit this looks like a very high outside temperature, or a short to ground. The reading is therefore unusable.

Can I keep driving with code P00DB active?

With caution: limp mode possible, have it checked soon

Common causes — P00DB

Sensor wiring shorted to ground Sensor failed internally Wet or damaged connector Pinched wire or damaged insulation Problem in the control unit or module reading the sensor (rare)

How do you fix code P00DB?

Inspect the sensor wiring and connector for damaged wires or moisture. It is normally not urgent for driving, but it is worth having checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes