Skip to content
Fault code dictionary (DTC)

P00DC — Ambient air temperature sensor B circuit high

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects a voltage that is too high on the circuit of ambient air temperature sensor B. To the control unit this looks like a very low outside temperature, or a broken wire or a disconnected sensor. The reading is therefore unusable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Very low or missing outside temperature on the dashboard
Automatic climate control regulating poorly
No other obvious driving problem

Common causes

Disconnected or corroded connector
Broken sensor wire
Sensor failed internally
Wiring shorted to a power supply
Problem in the control unit or module reading the sensor (rare)

What to do

Check that the sensor connector is fully seated and not corroded, then check the continuity of the wiring. It is normally not urgent for driving, but it is worth having fixed.

How to read code P00DC

This is an informational entry: it normally does not limit how the vehicle works.

The code P00DC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00DC mean?

Ambient air temperature sensor B circuit high. The control unit detects a voltage that is too high on the circuit of ambient air temperature sensor B. To the control unit this looks like a very low outside temperature, or a broken wire or a disconnected sensor. The reading is therefore unusable.

Can I keep driving with code P00DC active?

With caution: limp mode possible, have it checked soon

Common causes — P00DC

Disconnected or corroded connector Broken sensor wire Sensor failed internally Wiring shorted to a power supply Problem in the control unit or module reading the sensor (rare)

How do you fix code P00DC?

Check that the sensor connector is fully seated and not corroded, then check the continuity of the wiring. It is normally not urgent for driving, but it is worth having fixed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes