Skip to content
Fault code dictionary (DTC)

P00E7 — Intake air temperature bank 2: sensors disagree

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer compared several intake air temperature sensors on bank 2 and the values are not consistent with each other. Bank 2 is the side of the engine without cylinder 1. At least one sensor or its circuit is giving a wrong reading.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Slight loss of power
Rough idle
Fuel consumption that seems to vary for no reason
Possible limp mode in some cases

Common causes

Faulty air temperature sensor
Corroded connector or weak contact
Damaged wiring
Sensor near a heat source or fouled with oil
Faulty engine computer (rare)

What to do

With the engine cold, compare the temperatures read by the sensors with a scan tool: they should be very close. Then check the connector and wiring of the one that differs. You can keep driving, but have it checked in a reasonable time.

How to read code P00E7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00E7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (E7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00E7 mean?

Intake air temperature bank 2: sensors disagree. The engine computer compared several intake air temperature sensors on bank 2 and the values are not consistent with each other. Bank 2 is the side of the engine without cylinder 1. At least one sensor or its circuit is giving a wrong reading.

Can I keep driving with code P00E7 active?

With caution: limp mode possible, have it checked soon

Common causes — P00E7

Faulty air temperature sensor Corroded connector or weak contact Damaged wiring Sensor near a heat source or fouled with oil Faulty engine computer (rare)

How do you fix code P00E7?

With the engine cold, compare the temperatures read by the sensors with a scan tool: they should be very close. Then check the connector and wiring of the one that differs. You can keep driving, but have it checked in a reasonable time.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes