P00F3 — Humidity sensor out of range or not plausible
| Meaning | The engine computer found that the humidity sensor value is not plausible, for example it stays fixed or is outside what is expected given other conditions. The electrical circuit may be fine, but the sensor is probably measuring incorrectly. |
| Family | Powertrain (P) |
Typical symptoms
Slight drop in performance
Rough idle
Fuel consumption that seems to vary for no reason
No obvious symptoms in some cases
Common causes
Faulty sensor
Connector with resistive contact
Air intake or duct near the sensor with a fault
Damaged wiring
What to do
How to read code P00F3
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00F3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (F3) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00F3 mean?
Humidity sensor out of range or not plausible. The engine computer found that the humidity sensor value is not plausible, for example it stays fixed or is outside what is expected given other conditions. The electrical circuit may be fine, but the sensor is probably measuring incorrectly.
Can I keep driving with code P00F3 active?
With caution: limp mode possible, have it checked soon
Common causes — P00F3
Dirty, contaminated or aged sensor Faulty sensor Connector with resistive contact Air intake or duct near the sensor with a fault Damaged wiring
How do you fix code P00F3?
With a scan tool, see whether the humidity value changes sensibly and compare it with the day's conditions. Then check the sensor and connector. You can keep driving, but have it checked in a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00F2 — Humidity sensor circuit open or faulty
- Next code: P00F4 — Humidity sensor circuit: signal too low
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2