Skip to content
Fault code dictionary (DTC)

P00F9 — Turbo outlet pressure sensor A: implausible reading

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningSensor A at the turbo outlet works electrically, but the value it sends does not match what the engine computer expects for the driving conditions. It may be the sensor itself, or a real problem in the air circuit.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Reduced power or weak turbo
Irregular boost
Hissing or noises from the air circuit
Dark smoke or unusual fuel use

Common causes

Air leak in pipes or hoses after the turbo
Dirty or out-of-calibration sensor
Problem with the turbocharger or its control
Partly blocked intercooler or ducts
Sensor's small hose blocked or disconnected

What to do

First check pipes, clamps and hoses for visible leaks, then the sensor and its small hose. Do not take it lightly: uncontrolled boost pressure can wear the turbo.

How to read code P00F9

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00F9 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (F9) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00F9 mean?

Turbo outlet pressure sensor A: implausible reading. Sensor A at the turbo outlet works electrically, but the value it sends does not match what the engine computer expects for the driving conditions. It may be the sensor itself, or a real problem in the air circuit.

Can I keep driving with code P00F9 active?

With caution: limp mode possible, have it checked soon

Common causes — P00F9

Air leak in pipes or hoses after the turbo Dirty or out-of-calibration sensor Problem with the turbocharger or its control Partly blocked intercooler or ducts Sensor's small hose blocked or disconnected

How do you fix code P00F9?

First check pipes, clamps and hoses for visible leaks, then the sensor and its small hose. Do not take it lightly: uncontrolled boost pressure can wear the turbo.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes