Skip to content
Fault code dictionary (DTC)

P019E — Alternative fuel tank A pressure sensor circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected an electrical problem in the circuit of the pressure sensor for alternative fuel tank A, such as LPG, natural gas or hydrogen. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Switching to the main fuel or being unable to use the alternative one
Incorrect gas level or pressure reading
Uncertain starting on the alternative fuel
Rough running on the alternative fuel

Common causes

Corroded or loose sensor connector
Damaged, broken or shorted wiring
Faulty tank pressure sensor
Supply or ground problem at the sensor
Fault in the gas system control unit or engine control unit, which is rare

What to do

Check the sensor connector and wiring at the tank without taking apart any part of the gas system. Work on the alternative fuel system should be left to a qualified technician for safety reasons. If you smell gas, stop in an open area and have the system checked immediately.

How to read code P019E

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P019E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (9E) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P019E mean?

Alternative fuel tank A pressure sensor circuit fault. The control unit has detected an electrical problem in the circuit of the pressure sensor for alternative fuel tank A, such as LPG, natural gas or hydrogen. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system.

Can I keep driving with code P019E active?

With caution: limp mode possible, have it checked soon

Common causes — P019E

Corroded or loose sensor connector Damaged, broken or shorted wiring Faulty tank pressure sensor Supply or ground problem at the sensor Fault in the gas system control unit or engine control unit, which is rare

How do you fix code P019E?

Check the sensor connector and wiring at the tank without taking apart any part of the gas system. Work on the alternative fuel system should be left to a qualified technician for safety reasons. If you smell gas, stop in an open area and have the system checked immediately.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes