Skip to content
Fault code dictionary (DTC)

P019F — Alternative fuel tank A pressure sensor performance problem

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has found that the signal from the pressure sensor of alternative fuel tank A does not match what it expects, for example it does not change when it should or disagrees with other data. The electrical circuit does not appear to be broken, but the reading is not believable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Unrealistic gas pressure or level reading
Switching to the main fuel for no clear reason
Hard starting on the alternative fuel
Range on the alternative fuel seeming different from usual

Common causes

Dirty, aged or faulty tank pressure sensor
Real leak or pressure problem in the system
Connector or wiring with a poor contact
Problem with the tank valve or regulator
Control unit fault, which is rare

What to do

Have the system checked by a qualified technician, who can compare the real pressure with what the sensor reports. Do not look for leaks with open flames and do not take apart gas system parts. In the meantime, use the main fuel if the car allows it.

How to read code P019F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P019F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (9F) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P019F mean?

Alternative fuel tank A pressure sensor performance problem. The control unit has found that the signal from the pressure sensor of alternative fuel tank A does not match what it expects, for example it does not change when it should or disagrees with other data. The electrical circuit does not appear to be broken, but the reading is not believable.

Can I keep driving with code P019F active?

With caution: limp mode possible, have it checked soon

Common causes — P019F

Dirty, aged or faulty tank pressure sensor Real leak or pressure problem in the system Connector or wiring with a poor contact Problem with the tank valve or regulator Control unit fault, which is rare

How do you fix code P019F?

Have the system checked by a qualified technician, who can compare the real pressure with what the sensor reports. Do not look for leaks with open flames and do not take apart gas system parts. In the meantime, use the main fuel if the car allows it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes