Skip to content
Fault code dictionary (DTC)

P01B0 — Alt. fuel tank A level sensor: implausible reading

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit saw that the level read by the alternative fuel tank A sensor does not match what is expected, for example it does not change after refuelling or use, or it is outside what the tank can hold. The electrical circuit may be fine, but the measurement is not believable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Gas level stuck on one value
Level not rising after refuelling
Switch to petrol while gas is still left
Wrong gas range

Common causes

Stuck or worn level sensor
Damaged float or internal mechanical part
Connections with high resistance
Degraded wiring
Calibration or gas control unit problem (rare)

What to do

Compare the gauge with the gas you actually filled and check the sensor connections. The fault is not dangerous, but you could unexpectedly run out of gas, so have the sensor checked soon.

How to read code P01B0

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01B0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (B0) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01B0 mean?

Alt. fuel tank A level sensor: implausible reading. The control unit saw that the level read by the alternative fuel tank A sensor does not match what is expected, for example it does not change after refuelling or use, or it is outside what the tank can hold. The electrical circuit may be fine, but the measurement is not believable.

Can I keep driving with code P01B0 active?

With caution: limp mode possible, have it checked soon

Common causes — P01B0

Stuck or worn level sensor Damaged float or internal mechanical part Connections with high resistance Degraded wiring Calibration or gas control unit problem (rare)

How do you fix code P01B0?

Compare the gauge with the gas you actually filled and check the sensor connections. The fault is not dangerous, but you could unexpectedly run out of gas, so have the sensor checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes