P01B5 — Alt. fuel rail temperature sensor: implausible reading
| Meaning | The control unit saw that the temperature read by the alternative fuel rail sensor does not agree with other information, for example it stays fixed while the engine warms up or is very different from what is expected. The circuit may be fine, but the measurement is not believable. |
| Family | Powertrain (P) |
Typical symptoms
Engine running poorly on gas when hot or cold
Reduced performance on gas
Switch to normal fuel
Uncertain starting on gas
Common causes
Connections with high resistance
Wiring degraded by heat
A real temperature problem in the gas system
Control unit problem (rare)
What to do
How to read code P01B5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P01B5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (B5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P01B5 mean?
Alt. fuel rail temperature sensor: implausible reading. The control unit saw that the temperature read by the alternative fuel rail sensor does not agree with other information, for example it stays fixed while the engine warms up or is very different from what is expected. The circuit may be fine, but the measurement is not believable.
Can I keep driving with code P01B5 active?
With caution: limp mode possible, have it checked soon
Common causes — P01B5
Aged or inaccurate temperature sensor Connections with high resistance Wiring degraded by heat A real temperature problem in the gas system Control unit problem (rare)
How do you fix code P01B5?
Check the sensor connections and the condition of the wiring near the rail. The gas system should be checked with a live data reading to tell whether it is the sensor or a truly abnormal temperature.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P01B4 — Alt. fuel rail temperature sensor: circuit fault
- Next code: P01B6 — Alt. fuel rail temperature sensor: signal too low
Related codes
- P0100 — Mass air flow sensor: general circuit fault
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass air flow sensor: signal too high
- P0104 — Mass air flow sensor: intermittent signal
- P0105 — Manifold/barometric pressure sensor: general circuit fault
- P0106 — Manifold/barometric pressure sensor: implausible reading
- P0107 — Manifold/barometric pressure sensor: signal too low
- P0108 — Manifold/barometric pressure sensor: signal too high
- P0109 — Manifold/barometric pressure sensor: intermittent signal
- P010A — Mass air flow sensor B: circuit fault
- P010B — Air flow sensor B: signal out of range or implausible