Skip to content
Fault code dictionary (DTC)

P01E2 — Cylinder 12 injection timing too advanced

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that fuel injection in cylinder 12 happens before the commanded moment. Combustion in that cylinder starts early and the engine suffers for it. The code tells you the type of fault, not the failed part.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Knocking or unusual noise
Unstable idle
Loss of power when accelerating
Smoke or smell of unburnt fuel
Difficult cold starting

Common causes

Cylinder 12 injector worn or responding abnormally
Electrical problem in the injector wiring or connector
Irregular fuel pressure
Wrong signal from the crankshaft or camshaft sensors
Engine timing out of position
Internal control unit fault, which is rare

What to do

Have the live data of the cylinder 12 injector checked, together with the wiring and fuel pressure, and check the engine speed sensors before replacing parts. If the engine knocks, don't push it and have it inspected soon.

How to read code P01E2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01E2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (E2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01E2 mean?

Cylinder 12 injection timing too advanced. The control unit detected that fuel injection in cylinder 12 happens before the commanded moment. Combustion in that cylinder starts early and the engine suffers for it. The code tells you the type of fault, not the failed part.

Can I keep driving with code P01E2 active?

With caution: limp mode possible, have it checked soon

Common causes — P01E2

Cylinder 12 injector worn or responding abnormally Electrical problem in the injector wiring or connector Irregular fuel pressure Wrong signal from the crankshaft or camshaft sensors Engine timing out of position Internal control unit fault, which is rare

How do you fix code P01E2?

Have the live data of the cylinder 12 injector checked, together with the wiring and fuel pressure, and check the engine speed sensors before replacing parts. If the engine knocks, don't push it and have it inspected soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes