P0419 — Secondary air relay B: circuit fault
| Meaning | The engine computer has found a problem in the circuit of relay B of the secondary air system. Relay B is found on systems with more than one pump or air line. If the circuit doesn't respond properly, the pump it controls may not start or may stay on. Which relay is B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Second air pump not starting when cold
Or the pump running for a long time
Higher emissions in the first minutes
Possible failure at an emissions inspection
Common causes
Blown pump fuse
Relay connector or wiring damaged
Pump drawing too much current
Engine computer (rare)
What to do
How to read code P0419
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0419 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (19) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0419 mean?
Secondary air relay B: circuit fault. The engine computer has found a problem in the circuit of relay B of the secondary air system. Relay B is found on systems with more than one pump or air line. If the circuit doesn't respond properly, the pump it controls may not start or may stay on. Which relay is B depends on the manufacturer.
Can I keep driving with code P0419 active?
With caution: limp mode possible, have it checked soon
Common causes — P0419
Faulty relay B or worn contacts Blown pump fuse Relay connector or wiring damaged Pump drawing too much current Engine computer (rare)
How do you fix code P0419?
Check the fuse and relay B, then the wiring and operation of the pump it controls. You can keep driving, but have the fault checked within a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0418 — Secondary air relay A: circuit fault
- Next code: P041A — EGR temperature sensor B: circuit fault
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — EGR sensor A circuit low
- P0406 — EGR sensor A circuit high
- P0407 — EGR sensor B circuit low
- P0408 — EGR sensor B circuit high
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR temperature sensor A circuit fault
- P040B — EGR temperature sensor 1 circuit performance