P041A — EGR temperature sensor B: circuit fault
| Meaning | The engine computer has found a problem in the electrical circuit of EGR temperature sensor B. This sensor measures the temperature of the recirculated gas, and the computer uses it to check that the EGR works. This is a general code and doesn't say whether the fault is an open circuit, a short or something else. Which sensor is B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Uneven idle in some conditions
Loss of performance
Black smoke from the exhaust on diesel cars
Other EGR codes stored
Common causes
Wiring damaged, broken or touching ground
Faulty EGR temperature sensor B
Soot deposits on the sensor
Engine computer (rare)
What to do
How to read code P041A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P041A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (1A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P041A mean?
EGR temperature sensor B: circuit fault. The engine computer has found a problem in the electrical circuit of EGR temperature sensor B. This sensor measures the temperature of the recirculated gas, and the computer uses it to check that the EGR works. This is a general code and doesn't say whether the fault is an open circuit, a short or something else. Which sensor is B depends on the manufacturer.
Can I keep driving with code P041A active?
With caution: limp mode possible, have it checked soon
Common causes — P041A
Sensor connector corroded or loose Wiring damaged, broken or touching ground Faulty EGR temperature sensor B Soot deposits on the sensor Engine computer (rare)
How do you fix code P041A?
Check the connector and wiring of sensor B, then check the sensor itself. You can use the car for short trips, but have the EGR checked within a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0419 — Secondary air relay B: circuit fault
- Next code: P041B — EGR temperature sensor B: reading out of expected...
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — EGR sensor A circuit low
- P0406 — EGR sensor A circuit high
- P0407 — EGR sensor B circuit low
- P0408 — EGR sensor B circuit high
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR temperature sensor A circuit fault
- P040B — EGR temperature sensor 1 circuit performance