Skip to content
Fault code dictionary (DTC)

P04AE — EVAP purge valve B performance or stuck open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that EVAP purge valve B lets vapor through when it should be closed, or is not working as expected. If the valve stays open, fuel vapor reaches the engine at the wrong time and upsets the air-fuel mixture.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough idle or engine stalling
Hard starting, especially after refueling
Fuel smell
Rich mixture or jerking at low revs

Common causes

Purge valve dirty or with a plunger that does not seal
Valve with an internal mechanical fault
Damaged or incorrectly connected EVAP hoses
Problem in the valve's electrical control
Saturated or damaged charcoal canister

What to do

Have a technician check whether the valve actually closes when it is not commanded. You can drive the car, but if the engine stalls or starts with difficulty, act soon.

How to read code P04AE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04AE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (AE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04AE mean?

EVAP purge valve B performance or stuck open. The control unit has detected that EVAP purge valve B lets vapor through when it should be closed, or is not working as expected. If the valve stays open, fuel vapor reaches the engine at the wrong time and upsets the air-fuel mixture.

Can I keep driving with code P04AE active?

With caution: limp mode possible, have it checked soon

Common causes — P04AE

Purge valve dirty or with a plunger that does not seal Valve with an internal mechanical fault Damaged or incorrectly connected EVAP hoses Problem in the valve's electrical control Saturated or damaged charcoal canister

How do you fix code P04AE?

Have a technician check whether the valve actually closes when it is not commanded. You can drive the car, but if the engine stalls or starts with difficulty, act soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes