Skip to content
Fault code dictionary (DTC)

P04C4 — Fuel door lock position sensor: implausible signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe fuel door lock position sensor signal is present but does not match what the control unit commanded. For example, the lock shows as released after a lock command. The fault may be in the sensor or in the mechanism.
FamilyPowertrain (P)

Typical symptoms

Check engine or warning light on
Not-locked warning even though the door is closed
Lock seems to move little or badly
Door unlocks with difficulty
Behaviour changes with temperature or humidity

Common causes

Stiff lock mechanism or one that does not reach end of travel
Dirty sensor or microswitch, or lost calibration
Misaligned fuel door
Dirt or ice in the lock seat
High resistance in connector contacts

What to do

Check that the door is aligned and that the lock moves freely and cleanly. It is not urgent for driving, but have it checked as soon as practical.

How to read code P04C4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04C4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (C4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04C4 mean?

Fuel door lock position sensor: implausible signal. The fuel door lock position sensor signal is present but does not match what the control unit commanded. For example, the lock shows as released after a lock command. The fault may be in the sensor or in the mechanism.

Can I keep driving with code P04C4 active?

With caution: limp mode possible, have it checked soon

Common causes — P04C4

Stiff lock mechanism or one that does not reach end of travel Dirty sensor or microswitch, or lost calibration Misaligned fuel door Dirt or ice in the lock seat High resistance in connector contacts

How do you fix code P04C4?

Check that the door is aligned and that the lock moves freely and cleanly. It is not urgent for driving, but have it checked as soon as practical.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes