P04CE — EGR temperature sensor C circuit fault
| Meaning | The engine control unit has detected an electrical problem in the circuit of the EGR temperature sensor labelled "C", one of the sensors that measure the temperature of the recirculated exhaust gas. The signal is not what the unit expects, so it can no longer judge the EGR system properly. Which sensor is "C" depends on the manufacturer and the engine. |
| Family | Powertrain (P) |
Typical symptoms
Rough or jerky running at low revs
Slight loss of performance
More visible exhaust smoke than usual on diesel engines
Possible limp mode with reduced power
Common causes
Damaged, pinched or burnt wiring near hot parts
Faulty EGR temperature sensor
Sensor clogged with soot
Engine control unit problem (rare)
What to do
How to read code P04CE
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P04CE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (CE) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P04CE mean?
EGR temperature sensor C circuit fault. The engine control unit has detected an electrical problem in the circuit of the EGR temperature sensor labelled "C", one of the sensors that measure the temperature of the recirculated exhaust gas. The signal is not what the unit expects, so it can no longer judge the EGR system properly. Which sensor is "C" depends on the manufacturer and the engine.
Can I keep driving with code P04CE active?
With caution: limp mode possible, have it checked soon
Common causes — P04CE
Corroded or poorly seated sensor connector Damaged, pinched or burnt wiring near hot parts Faulty EGR temperature sensor Sensor clogged with soot Engine control unit problem (rare)
How do you fix code P04CE?
First check the sensor connector and wiring, looking for rubbed or burnt wires and moisture. You can drive short distances, but don't leave it too long: an uncontrolled EGR can raise emissions and foul the engine.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P04CD — Fuel door open request switch: stuck on
- Next code: P04CF — EGR temperature sensor C: signal out of range
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — EGR sensor A circuit low
- P0406 — EGR sensor A circuit high
- P0407 — EGR sensor B circuit low
- P0408 — EGR sensor B circuit high
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR temperature sensor A circuit fault
- P040B — EGR temperature sensor 1 circuit performance