Skip to content
Fault code dictionary (DTC)

P04CD — Fuel door open request switch: stuck on

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees the fuel door open request as always active, as if the button were held down. It may be a jammed button or a shorted wire.
FamilyPowertrain (P)

Typical symptoms

Check engine or warning light on
Door unlocks or tries to open by itself
Door does not stay locked
Button seems jammed
Fault message on the dashboard

Common causes

Jammed or dirty button
Door misaligned and pressing on the sensor
Shorted button wire
Moisture in the button or connector
Control unit with a faulty input

What to do

Check whether the button springs back after being pressed and whether the door presses abnormally on the sensor. If the door stays unlocked, have it checked soon to avoid it opening unintentionally.

How to read code P04CD

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04CD starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (CD) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04CD mean?

Fuel door open request switch: stuck on. The control unit sees the fuel door open request as always active, as if the button were held down. It may be a jammed button or a shorted wire.

Can I keep driving with code P04CD active?

With caution: limp mode possible, have it checked soon

Common causes — P04CD

Jammed or dirty button Door misaligned and pressing on the sensor Shorted button wire Moisture in the button or connector Control unit with a faulty input

How do you fix code P04CD?

Check whether the button springs back after being pressed and whether the door presses abnormally on the sensor. If the door stays unlocked, have it checked soon to avoid it opening unintentionally.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes