Skip to content
Fault code dictionary (DTC)

P04D2 — EGR temperature sensor C: intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees the signal from EGR temperature sensor "C" appear and disappear, or jump around in a way that makes no sense. It is usually a contact that is lost from time to time, so the fault may not be present when the car is checked. The letter "C" depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light coming on and going off
Occasional jerks or hesitation
Idle that hunts up and down
Problems more noticeable with vibration or after rain
Occasional loss of power

Common causes

Loose connector or corroded contacts
Wire partly broken inside its insulation
EGR temperature sensor starting to fail
Wiring rubbing against engine parts
Moisture getting into the connector

What to do

Carefully move the wiring and connector with the engine running to see whether the signal changes, and check the places where the wire bends or rubs. This kind of fault tends to get worse over time, so it is better not to postpone it.

How to read code P04D2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04D2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (D2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04D2 mean?

EGR temperature sensor C: intermittent signal. The control unit sees the signal from EGR temperature sensor "C" appear and disappear, or jump around in a way that makes no sense. It is usually a contact that is lost from time to time, so the fault may not be present when the car is checked. The letter "C" depends on the manufacturer.

Can I keep driving with code P04D2 active?

With caution: limp mode possible, have it checked soon

Common causes — P04D2

Loose connector or corroded contacts Wire partly broken inside its insulation EGR temperature sensor starting to fail Wiring rubbing against engine parts Moisture getting into the connector

How do you fix code P04D2?

Carefully move the wiring and connector with the engine running to see whether the signal changes, and check the places where the wire bends or rubs. This kind of fault tends to get worse over time, so it is better not to postpone it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes