Skip to content
Fault code dictionary (DTC)

P04D7 — Exhaust brake input: intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees the signal in the exhaust brake input circuit appear and disappear or change abruptly. It is usually a contact that is lost from time to time, so the fault may not always be present. The details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light coming on and going off
Engine brake working only some of the time
Sudden engagement or release
Problems more noticeable with vibration
Occasional warning on the dashboard

Common causes

Loose or corroded connector
Partly broken wire
Control switch with worn contacts
Wiring rubbing against something
Moisture in the connector

What to do

Check connectors and wiring by carefully moving them to see whether the behaviour changes, and check the switch. An engine brake that works on and off is unreliable on descents, so don't put it off.

How to read code P04D7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04D7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (D7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04D7 mean?

Exhaust brake input: intermittent signal. The control unit sees the signal in the exhaust brake input circuit appear and disappear or change abruptly. It is usually a contact that is lost from time to time, so the fault may not always be present. The details depend on the manufacturer.

Can I keep driving with code P04D7 active?

With caution: limp mode possible, have it checked soon

Common causes — P04D7

Loose or corroded connector Partly broken wire Control switch with worn contacts Wiring rubbing against something Moisture in the connector

How do you fix code P04D7?

Check connectors and wiring by carefully moving them to see whether the behaviour changes, and check the switch. An engine brake that works on and off is unreliable on descents, so don't put it off.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes