P04EA — EVAP system: small leak on the fuel tank side
| Meaning | The engine computer ran a leak test on the system that recovers fuel vapors and found a small leak on the side toward the fuel tank. It is not liquid fuel leaking, but vapor. This is a standard SAE/ISO code. |
| Family | Powertrain (P) |
Typical symptoms
Slight fuel smell near the car
No change in how the car drives
Difficulty or clicking during refueling
Failed emissions test
Common causes
Cracked vapor lines or loose fittings
Leaking seal on the in-tank pump
Faulty valve or sensor in the EVAP system
Corroded or damaged tank or filler neck
What to do
How to read code P04EA
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P04EA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (EA) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P04EA mean?
EVAP system: small leak on the fuel tank side. The engine computer ran a leak test on the system that recovers fuel vapors and found a small leak on the side toward the fuel tank. It is not liquid fuel leaking, but vapor. This is a standard SAE/ISO code.
Can I keep driving with code P04EA active?
With caution: limp mode possible, have it checked soon
Common causes — P04EA
Fuel cap not closed properly or worn seal Cracked vapor lines or loose fittings Leaking seal on the in-tank pump Faulty valve or sensor in the EVAP system Corroded or damaged tank or filler neck
How do you fix code P04EA?
First check that the fuel cap is closed properly and its seal is intact. If the light stays on, have the leak located with a smoke test. You can keep driving, but don't leave it for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P04E9 — EGR temperature sensor D: erratic or intermittent...
- Next code: P04EB — EVAP system: small leak on the fresh air side
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — EGR sensor A circuit low
- P0406 — EGR sensor A circuit high
- P0407 — EGR sensor B circuit low
- P0408 — EGR sensor B circuit high
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR temperature sensor A circuit fault
- P040B — EGR temperature sensor 1 circuit performance