Skip to content
Fault code dictionary (DTC)

P04EB — EVAP system: small leak on the fresh air side

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe vapor recovery system leak test found a small leak on the side that draws in clean air, meaning the charcoal canister and air intake side. The system cannot hold the expected pressure. This is a standard SAE/ISO code, but component locations vary by model.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
No obvious change in driving
Slight fuel smell in some cases
Failed emissions test
Clicking during refueling

Common causes

Cracked air intake hose or fitting
Leaking or damaged charcoal canister
Vent valve not sealing
Dirty or clogged EVAP air filter
Water or dirt in the air intake
Faulty wiring or valve

What to do

Check the hoses and the vent valve near the charcoal canister, especially if the car has been through water or washed underneath. Have a smoke test done if you find nothing.

How to read code P04EB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04EB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (EB) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04EB mean?

EVAP system: small leak on the fresh air side. The vapor recovery system leak test found a small leak on the side that draws in clean air, meaning the charcoal canister and air intake side. The system cannot hold the expected pressure. This is a standard SAE/ISO code, but component locations vary by model.

Can I keep driving with code P04EB active?

With caution: limp mode possible, have it checked soon

Common causes — P04EB

Cracked air intake hose or fitting Leaking or damaged charcoal canister Vent valve not sealing Dirty or clogged EVAP air filter Water or dirt in the air intake Faulty wiring or valve

How do you fix code P04EB?

Check the hoses and the vent valve near the charcoal canister, especially if the car has been through water or washed underneath. Have a smoke test done if you find nothing.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes