Skip to content
Fault code dictionary (DTC)

P04EC — EVAP system: large leak on the fuel tank side

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer found a major vapor leak in the EVAP circuit on the fuel tank side. The system simply cannot hold pressure. This is a standard SAE/ISO code.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Strong fuel smell
Trouble refueling
Failed emissions test
No change in driving

Common causes

Fuel cap missing or not closed
Vapor line disconnected or broken
Damaged or corroded filler neck
Leaking in-tank pump seal
EVAP valve stuck open

What to do

First, check that the fuel cap is present and properly closed. If the fuel smell is strong or you see dripping, don't wait: fuel vapors are flammable and need to be dealt with right away.

How to read code P04EC

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04EC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (EC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04EC mean?

EVAP system: large leak on the fuel tank side. The engine computer found a major vapor leak in the EVAP circuit on the fuel tank side. The system simply cannot hold pressure. This is a standard SAE/ISO code.

Can I keep driving with code P04EC active?

With caution: limp mode possible, have it checked soon

Common causes — P04EC

Fuel cap missing or not closed Vapor line disconnected or broken Damaged or corroded filler neck Leaking in-tank pump seal EVAP valve stuck open

How do you fix code P04EC?

First, check that the fuel cap is present and properly closed. If the fuel smell is strong or you see dripping, don't wait: fuel vapors are flammable and need to be dealt with right away.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes