P04CC — Fuel door open request switch: intermittent signal
| Meaning | The fuel door open request switch signal comes and goes or changes without anyone pressing it. The control unit reads it as intermittent. Usually a contact opens and closes with vibration or moisture. |
| Family | Powertrain (P) |
Typical symptoms
Door sometimes opens and sometimes does not
Button only responds after several presses
Fault appears on rough roads or after washing
Door tries to open by itself
Common causes
Button wire with damaged or partly broken insulation
Worn button with an unstable contact
Moisture in the button or connector
Door with play moving the sensor
What to do
How to read code P04CC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P04CC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (CC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P04CC mean?
Fuel door open request switch: intermittent signal. The fuel door open request switch signal comes and goes or changes without anyone pressing it. The control unit reads it as intermittent. Usually a contact opens and closes with vibration or moisture.
Can I keep driving with code P04CC active?
With caution: limp mode possible, have it checked soon
Common causes — P04CC
Connector with corroded or loose contacts Button wire with damaged or partly broken insulation Worn button with an unstable contact Moisture in the button or connector Door with play moving the sensor
How do you fix code P04CC?
Check whether the button has play or dirt and whether the connector shows signs of water. Telling the technician when the fault appears helps a lot in finding it.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P04CB — Fuel door open request switch: circuit high
- Next code: P04CD — Fuel door open request switch: stuck on
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — EGR sensor A circuit low
- P0406 — EGR sensor A circuit high
- P0407 — EGR sensor B circuit low
- P0408 — EGR sensor B circuit high
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR temperature sensor A circuit fault
- P040B — EGR temperature sensor 1 circuit performance